I have very small hands and can't hardly reach my brake lever on my2013 Polaris Pro. Do you know of any aftermarket lever that I can get to fit my hand? You help would be appreciated.
Help-Need brake lever for small handed person
- Thread starter Let It Snow 1
- Start date
A
ak
Well-known member
If the arctic cat fits try these.
http://www.tricked-toys.com/ProdBrakeLever.htm
I had one on my cat and it seemed to be closer the bars.
http://www.tricked-toys.com/ProdBrakeLever.htm
I had one on my cat and it seemed to be closer the bars.
G
gman086
Well-known member
Putting the lever pin through the same holes and the brake lock lever pin so that they are in the same location... the AMP lever is 1/4" (actual .240") closer to the bars, on the finger-surface, than the stock Polaris/Hayes lever.
The stock lever profile is .570" tall/.410 thick....Amp .290" tall/.400 thick (tapers) both taken at the middle of the lever.
Heres a photo of the two.. the AMP 7020/7019 on the Stock Polaris Hayes with the pins through the same holes.
Although they are not radically different in position or location of the lever surface.... I also like the way the way the AMP lever feels... I'm a small guy and this minor difference feels better to me, in use, than the stock lever.
The tricked toys lever is actually the AMP lever.
.
The stock lever profile is .570" tall/.410 thick....Amp .290" tall/.400 thick (tapers) both taken at the middle of the lever.
Heres a photo of the two.. the AMP 7020/7019 on the Stock Polaris Hayes with the pins through the same holes.
Although they are not radically different in position or location of the lever surface.... I also like the way the way the AMP lever feels... I'm a small guy and this minor difference feels better to me, in use, than the stock lever.
The tricked toys lever is actually the AMP lever.
.
Same/Same Grasshoppah!
Gman,
Your lever and mine are the same lever, both new stock it would seem... might be a diff in what we are calling "tall" and "thick"... but they are the same, we have the same .290 measurement in my post above.
Have fun!...E-Man
.
Gman,
Your lever and mine are the same lever, both new stock it would seem... might be a diff in what we are calling "tall" and "thick"... but they are the same, we have the same .290 measurement in my post above.
Have fun!...E-Man
.
Last edited:
W
winter
Well-known member
lever
Great post and thanks for all the info.
Heather is this you??
Ann said you had trouble with the brake.
I just ordered 2 for our pros.
Great post and thanks for all the info.
Heather is this you??
Ann said you had trouble with the brake.
I just ordered 2 for our pros.
Yep this is me, my hands are like little kid hands, so just the tip of my index finger hits the lever. So, I need something a bit closer to the handlebar. We were going to see about having one machined, but if we can find an aftermarket one, that would be easier. Let me know when they come in, so I can feel the fit. Thanks.
