Help mesurements please!

[super swede]

I need to know how tal the hawk should sitt in the rear,a mesurement from
the floor to one of the rear bolts in the main sideplates would shure help.
Tanks
Jonny

 

[TLKDPROD]

From the center of the 12mil footpeg hole to the bottom of the hifax, you're looking at roughly 12-1/4". You can add 1/2" it wouldn't hurt at all. From there to the ground it depends how high of a lug you got. That's considering the suspenson rails are flat.

I don't know what you're gonna come up with for the back mounting point on that. Let us know, I think you're gonna be missing a few inches of frame but you can always make a bracket, that's what I did on mine I ran out of frame (by about 3") where I throw the back parralel bar pivot.

Good luck.

 

[super swede]

Thanks i got hold of Steve at outbacks he mesured his at 20 and a
quarter inch at the lower hole in the back.
So between you guys i should be able to figure it out.
I am planing on extensions for the rear sissor.