help! M1000 cutting out at 6800 to 7400

[WyoBoy1000]

what to your gauges tell you. Check compression for the heck of it to.

 

[M1000Mod162]

ok guys went out and rode the sled again today and i found that the cutting out bogging was the worst when the motor was cold. If i got it hot and ran it for a while it would just about stop doing it, but then when i shut it off again its back again and the colder the motor the worse it is. Egts reading like 1050 wot and like 1100 at 6900 rpms. Any reason why it would get better when it was warm?

 

[undercat]

power valves

friend had this problem on a m7 and he found out it was the settings for the power valves that were out of wack