HCR springs on Pro shocks

[Killer Time Racing]

Reading posts about IFS springs and found one post mentioning installing HCR titanium springs on a Non Sway bar Pro

What are others thoughts ???

They are very inexpensive!!

 

[Killer Time Racing]

P/N 2603-373 says 145# 11.5"

That should help keep the front in check being the stockers are 120# and 8"??

Um the inexpensive part is a no go they are $420 but TI so they are bare and can be PC or painted any color of your choosing !!

 

[Sheetmetalfab]

They are cheap used.

Semi stiff with a 36" front end.
I am 230 geared up and push it so they are good.

 

[Sheetmetalfab]

 

[mountainhorse]

Stock Pro RMK spring 2011 -2015, AND 2015 snowcheck with resi are 10.25" with 100lb rating.

The Assault has an 11.0" long with 130 lb rating.

That HCR spring is definately beefy in comparison.




.

 

[Killer Time Racing]

Stock Pro RMK spring 2011 -2015, AND 2015 snowcheck with resi are 10.25" with 100lb rating.

The Assault has an 11.0" long with 130 lb rating.

That HCR spring is definately beefy in comparison.




.

Is the #130 also true for SBAs also ??

 

[mountainhorse]

SBA's run the same spring as the RMK's.... 100 lb.

So... no.




.

 

[LoudHandle]

I bought a few sets from this guy:

http://www.snowest.com/forum/showthread.php?t=352789

While not even in the same league as the RCS TI Springs, the price is / was good enough for testing purposes. He had many more rates than he has listed in this thread and as that was about a year ago, they may be gone, but figured I'd try and help.

 

[Killer Time Racing]

I'm going with the 2014 Assault RMK springs .. they come in Black White and Red and are 130# .. should get the front happy with no sway bar and the extra length will cure my bottomed out Adjuster

Update:P/N 7043679 $36.99 comes in All three colors

 

[mountainhorse]

KTR... Please post up some side by side pics if you have a chance of the new vs. original springs.

Thanks



.