Gearing/Clutching Khaos 3"

[jos]

Do we know what the gearing will be on the 3" Khaos? Lower then the 2,6" quickdrive I assume. Was thinking a bit regarding the clutching, most kits are for the 2,6", perhaps some more weight could be of use on the 3"?
Anyone knows more?

 

[jos]

For low altitude, if it matters

 

[BILTIT]

I highly recommend the slp magnum adjustables for low altitude. They really load the motor down low and midrange. I am currently running them on an 11 pro (medium modded) with 155x 3" at 2200ft.

Sent from my SM-A530W using Tapatalk

 

[St. Hellens rider]

less weight

 

[greasemonkey3406]

I dont believe the SLP magnums are heavy enough for the 850 at low elevation. I'm going with an Indy Specialties kit with my Khaos.

 

[BILTIT]

Might not be, depends how you spring it too i guess. I know i am running 2+ grams less than other weights and loading the motor much harder than before.

Sent from my SM-A530W using Tapatalk

 

[DITCHBANGER]

on slp site for magnums, the 850 at sea level they recommend 69.2gr with stock helix and very slight change in primary spring. weight can go to 75 gr so lots of room.

 

[jos]

Ok Gentlemen, still question remains, gearing compared 2,6 vs 3"?

 

[Sheetmetalfab]

Ok Gentlemen, still question remains, gearing compared 2,6 vs 3"?

check the parts fische.

would be easier than posting here.

in the past all 3” track sleds were 19/44 stock.

 

[jos]

check the parts fische.

would be easier than posting here.

in the past all 3” track sleds were 19/44 stock.

That would bbe the best way!, where can I find them for the 2020s?

 

[Sheetmetalfab]

Polaris Snowmobile OEM Parts, Babbitts Polaris PartsHouse

Shop our large selection of Polaris Snowmobile OEM parts, original equipment manufacturer parts and more online or call at (231)737-4542

www.polarispartshouse.com

All the 2020 parts have been live for a couple months.

but you are right I don’t see the khaos

 

[neden]

Browse

19/44 listed for the Khaos 3"