gas can

[rbblrsn]

Running Rotopax 1.75 gallon, probably could stack a second if planning a long run or get a 3 gal. Works fine, nice low profile never gets in the way but kinda pricey. Simple to leave behind if I'm planning a short run. But it is an Arctic Cat so I usually need all the gas I can get

 

[TRUEBLUEMAX]

Sorry it took so long to get you pics. I like the way this works. I don't like hanging a lot of weight on the back of the tunnel so this works great


Sent from my iPhone using Tapatalk

 

[joshkoltes]

That setup looks pretty decent, nice and low profile. Is that the 1.5 gallon can or bigger?

 

[TRUEBLUEMAX]

It's two gallons


Sent from my iPhone using Tapatalk

 

[Vern]

Feast your eyes on this sexy craigerbuilt.

I got a buddy that's got one of those set ups sitting in his shop I've been trying to get off of him, but he's not letting go

 

[joshkoltes]

Upon further findings it seems that the sled just sputtered out and died as I was rolling into the trailer. The gauge was flashing empty but as I tried to dump in five gallons today I over filled it.
Not sure what happened, it was kinda cutting out every now and then that day between throttle stabs like a Polaris that I'm used to.
So many I don't need the extra can?

Just got the yep one and it's solid, kinda heavy. Now I have three different brands

 

[joshkoltes]

Figured I'd eye up all three can racks before I drilled holes

The hrp was nice


I would have had to buy another mountain addiction can



Ended up mounting the mountain fit rack with the hrp can





If I get more of these little studs I can just swap the rack between my seven sleds



Then I had to find a place for the belt, easy and tied it up with six feet of rope, and four feet of mechanics wire

 

[Warren_G]

Well, first post for me on this forum, so here is my custom job I did on the used sled I bought this season. I was tired of beer cans exploding on the trail in the bag on my previous sled, so I wanted to mount a cooler bag solidly, and thought I would integrate some extra gas with it as well. The whole thing can be quickly removed with 4 philips screws. Let me know what you think: