FYI: Z-BROZ HAS THIER ARMS IN STOCK FOR THE PRO/IQ'S

[mountainhorse]

I've been chatting with the boys at Z-broz here at the Jackson Hole Hillclimbs...

Some of you have been wanting info on availability.

They have just finished a run of their front suspensions for the Polaris PRO RMK and IQ RMK'S. All of the backorders have been filled and they have some left as open stock.

Both the 43" and 40" are in stock in limited quantities. They have some at the event with them as well... boxed up and ready to go.

Here's a pic of Nate (Left) and Ryan Zollinger... stop by and say hello.

MH

 

[MNIQR]

Ive met both of them a few times now and chatted with Nate on the phone more than once. Both great guys and extremely knowledgeable.

 

[IQRIDR]

Yep and most of us dealers now have them in stock also. I have 3 set in stock

 

[AndrettiDog]

'Bout time...mine have been on order for 2 months. Their shocks rip and their service is great. Worked with Nate on the phone to setup my X1's.

 

[EricW]

MH or anyone else know if the Exit shocks from my 43" 08 IQ setup will bolt into my new Pro with the OEM A-Arms. Just looking to try those shocks against the W/E that came on the Pro without changing the arms. 08 sled is in storage so I havent looked/measured. Thanks. EW

Will these shocks

Work as a bolt on in this sled

 

[AKSNOWRIDER]

As far as I know Eric, the 08-10 dragons had the same A-arms..the shocks are a 1/4" diff in length but I dont see why they wont work just fine..dampening may be off due to the lighter weight of the pro..hmm, but you want to put them on the stock arms?..do you know how the shocks compared eye to eye vrs the stock walkers on the dragon?

 

[IQRIDR]

The shock mounting bolts are a slightly bigger metric size than the 3/8 standard on the IQ's...but I think they would work ok. You would need to get the zbroz a arm bushings for the pro though...bushings are completely different on the Pro.