I'm new to the site, so I hope this is all done correctly. I have 2005 Fusion 900 with 2500 miles.
I was riding this weekend, hit a jump and come down hard. Machine landed on it's feet, the rider did not. I got back on and it was idling fine but when I went to go it just ran rough. I limped to a tree line and shut it off to check it out and it hasnt started again.
I have checked all the connections on the sled they seem to be fine. I have 60psi fuel pressure one the schrader valve, 120 and 118 compression on each hole, and if you check for spark with a spark checker there is spark when you pull the rope. Still no go. It sounds like it wants to run but wont take off. Have done all the resistance checks on the stator all seem to be good.
Any help would be greatly appreciated!
Cheers
I was riding this weekend, hit a jump and come down hard. Machine landed on it's feet, the rider did not. I got back on and it was idling fine but when I went to go it just ran rough. I limped to a tree line and shut it off to check it out and it hasnt started again.
I have checked all the connections on the sled they seem to be fine. I have 60psi fuel pressure one the schrader valve, 120 and 118 compression on each hole, and if you check for spark with a spark checker there is spark when you pull the rope. Still no go. It sounds like it wants to run but wont take off. Have done all the resistance checks on the stator all seem to be good.
Any help would be greatly appreciated!
Cheers