Fox Qs3 Setup

[Concrete356]

Hey guys, Purchased a set of Fox QS3 for my 2019 850 155 RMK. New to floats. Was wondering what you where running for pressures in them. I’m 170 pounds fully dressed. I searched and searched but can’t find much on the Axys. Thanks in advance

 

[akmclean]

Ive seen a PDF sheet from Tom's snowmobile that had some good starting points for various size riders and riding styles. Not sure how to find that again.

Im 225 and pack an extra 3 gallons of fuel around and ride pretty aggressive. My fronts have 60# main 120# evol. FTS has 60 I think, and the rear has 130 main 200 evol.

One thing to keep in mind is they are very susceptible to changes in elevation and especially it seems temperature. For this reason alone I will probably go with coil over next time.

These are FOX Qs3 with the custom valving from Carls Cycle on my 2017 Axys Pro RMK 800 155.

 

[newfieassault]

Fox Shocks

Call Fox, they will help you out.

 

[Madtown]

OP do you have the standard Fox QS3's or Burandt editions? I have a sheet with pressures that I can PM you with.

 

[Cameltoe]

OP do you have the standard Fox QS3's or Burandt editions? I have a sheet with pressures that I can PM you with.

Could you shoot me over the sheet with pressures? I have a set of Burandts arriving tomorrow.

 

[HiWaYman92]

I’m needing to revisit some recommendations also, mine is pushing hard.

 

[Madtown]

Start with below pressures. This is for a 180 ish pound person.

-Front ski shocks with sway bar, 65 psi main & 130 psi Evol chamber

-Front track shock, 50 psi for a 155, 60 psi for a 163 & 65 psi for a 174

-Rear track shock 130 psi main & 140 psi Evol

 

[xpspenziv]

 

[xpspenziv]

 

[jfgsx]

OP do you have the standard Fox QS3's or Burandt editions? I have a sheet with pressures that I can PM you with.

Can you send me the sheet you have for air set up?
It will be nice

 

[Tahoesled]

Can I get that sheet as well please. Put new burandt qs3’s on and trying to figure numbers for my 235 rider weight plus 23lb tunnel bag