Fox Float 3 Evols, hit the sway bar?

[André]

This is how they work with zbroz 36" front end, i got about 3mm between the bar and the evol chamber, this will work but to change pressure i will have to remove the shock.

If the rebound adjuster would be on the other side everything would have worked.

Not fun at all!!

 

[FCR112]

TTT

Any fitment issue updates for the 13-14 pro's? Which arms work and which don't with the swaybar installed?

 

[powerfuldodge]

This is how they work with zbroz 36" front end, i got about 3mm between the bar and the evol chamber, this will work but to change pressure i will have to remove the shock.

If the rebound adjuster would be on the other side everything would have worked.

Not fun at all!!

I'm in the same boat as you... Once there set up they are good , just a bit of pain removing them to put air in , and I had air leaking in the main camber and had to send it back to fox


Powerfuldodge@me.com
2013 pro rmk
2012 136" switchback turbo
2006 660 switchback
2014 dodge ram 3500 Longhorn

 

[FCR112]

I'm in the same boat as you... Once there set up they are good , just a bit of pain removing them to put air in

Is this the 16.625" (13-14 length) on zbroz 36" arms without the sway bar installed?

 

[powerfuldodge]

Is this the 16.625" (13-14 length) on zbroz 36" arms without the sway bar installed?

Yes


Powerfuldodge@me.com
2013 pro rmk
2012 136" switchback turbo
2006 660 switchback
2014 dodge ram 3500 Longhorn

 

[RJF]

So do I understand correctly that this is only a problem with the Evol 3 "R" version shock?

I have a 39" Zbroz front end and regular Float 3 Evols coming that fit a 11-12 Pro.

I should be able to install the shock right side up with the chambers above at the bulkhead, right?

Also, some of you guys are saying that with the longer 17"+ shocks the front end is really tall? Should I have ordered the 16.6" 13-15 shocks instead? Obviously Zbroz says to use the 11-12 shocks.