flooded 600sdi summit

[dieseldog800]

Here's the deal, started my 2007 600ho sdi summit the other day. Let it idle for about three minutes and started missing on one cylinder. I tried to speed up the motor but it didn't clean out in time and ended up flooding out. So in with the brand new plugs i went, after pulling over several times without plugs in, to dry the cylinder out. Tried to start it and nothing fired. Pulled the plugs and they are WET. I have spark and the battery has 12.2 volts. My question is how do I dry it out since every time I pull the rope to start it, you can hear the fuel pressure pump up and i assume it gives the cylinder a shot of gas. Has 1600 miles and never changed plugs. Any suggestions on how to get it dried out?

 

[AkSledHed]

Pull your dess key off and try it. I had this same thing happen to me last year, I pulled the plugs, removed the DESS key and pulled it about 10 times, put in new plugs and it fired right up.

 

[INKEDRIDER]

two thing look in your owners manual and find the two fuses that control your injectors take them out and pull once it starts to fire put the fuses back if that dosent work you can pull it over holding a torch over the spark plug hole and it will ignite the fuel and dry the cylinder out

 

[dieseldog800]

Thanks guys! Never thought of that. I will give it a try when I get home and see if she fires up! Much appreciated!