F/S Ski-doo mod motor triple

[toys-4-us]

This is a custom built triple cylinder. It started life as a 583 and has 1 more 583 cylinder welded to it, do the math, it would roughly be a 900 I presume. It was built by Val Simmons, I don't know enoough about it to sound intelligent, but I have the heads, gaskets, motor, pistons, coils, and I think the pipes. It was all pretty fresh, but has been sitting in the shop now for almost 3 years. $500 obo call 1-435-512-3043 Thanks......Steve

 

[wheresthesnow]

Is it a twin rotary valve.

 

[toys-4-us]

back up top!!

 

[d&mraceengines]

do you have the carbs for it to ?

 

[toys-4-us]

It is not a rotary valve, it is reed cage now. and I will have to check on the carbs, but I don't think so.

 

[toys-4-us]

I got pics, but I can't load them on here, so if your interested, I can e-mail them.....Thanks.....Steve

 

[RACETIME3]

pics

pics to Kevin@iglu.ca please.
Any chance it is a 809 or 780 Triple 925?
Shipping to Canada?

 

[d&mraceengines]

Hi!
Please send pics to danandmelissamcdunn@yahoo.com. Thanks, Dan

 

[toys-4-us]

pics are up.

 

[DWHalverson]

If it is stock 583 bore and stroke then it is an 866cc triple. Are you sure you have pipes? What chassis were they for? I would have to guess the old F-chassis, mid 90's.

 

[toys-4-us]

I do not have pipes, and I don't know what chassis It came out of. Sorry

 

[clintonmotor]

Skidoo homemade triple

This is a custom built triple cylinder. It started life as a 583 and has 1 more 583 cylinder welded to it, do the math, it would roughly be a 900 I presume. It was built by Val Simmons, I don't know enoough about it to sound intelligent, but I have the heads, gaskets, motor, pistons, coils, and I think the pipes. It was all pretty fresh, but has been sitting in the shop now for almost 3 years. $500 obo call 1-435-512-3043 Thanks......Steve

Steve, do you still have this engine. Call me if you do Phil Barr 517-403-3331