EZ-LYNK EZ LYNK Key programing

[EZ-LYNK]

G4 Key programing is now available on the EZ LYNK platform. The hardware doesn't lock to individual machines, this will allow you have one in your group to take care of your all sleds. Read and clear engine codes , datalog, ECM flashing, etc. If you already have an Auto Agent 2 or 3 all you need are the BRP cables.

G5 keys are in the works.

 

[christopher]

Just to be clear.
The "Key" for the Gen4 and the Gen5 will be different pieces of hardware?
or will the Gen5 Key be backwards compatible with the Gen4 series of Sleds?

 

[EZ-LYNK]

Just to be clear.
The "Key" for the Gen4 and the Gen5 will be different pieces of hardware?
or will the Gen5 Key be backwards compatible with the Gen4 series of Sleds?

Hardware is the same, programing protocol is different.

 

[christopher]

Hardware is the same, programing protocol is different.

Got it
so its a Software Key.

 

[BBP]

Any way to program it so that any tether works?

 

[EZ-LYNK]

Any way to program it so that any tether works?

Not any tether, however you can add multiple tethers to one machine. So you can set it up so your tether works on your buddy's sled and vise versa. Or if you have several sleds of your own it's the same thing. Just assign each key to each sled. The process only takes a couple seconds per key

 

[christopher]

Not any tether, however you can add multiple tethers to one machine. So you can set it up so your tether works on your buddy's sled and vise versa. Or if you have several sleds of your own it's the same thing. Just assign each key to each sled. The process only takes a couple seconds per key

And I have been PAYING the shop to do this on all my sleds for years now.
Each Key I had worked on every sled I had so they were all 100% interchangeable.

 

[likkerpig]

Cool product but I'm sitting here just wanting a real dess post....

 

[christopher]

Ya well, your in good
Company! Waiting on mine as well.


Sent from my iPhone using Tapatalk

 

[snow-doo]

Who knows when,I received a letter from BRP dated 12/1/22 and I got it 2/6/23.Dealer said BRP will send them to where you purchased them because they follow the vin.#.if the post is as slow as the letter,then I will have sold it by then

 

[christopher]

Who knows when,I received a letter from BRP dated 12/1/22 and I got it 2/6/23.Dealer said BRP will send them to where you purchased them because they follow the vin.#.if the post is as slow as the letter,then I will have sold it by then

once we get them installed we can reprogram them with the EZ-LYNK!

 

[yeseniabedientnpo70]

G4 Key programing is now available on the EZ LYNK platform. The hardware doesn't lock to individual machines, this will allow you have one in your group to take care of your all sleds. Read and clear engine codes , datalog, ECM flashing, etc. If you already have an Auto Agent 2 or 3 all you need are the BRP cables.

G5 keys are in the works.

Of course, programming everything under one key is cool, but dangerous.

 

[yeseniabedientnpo70]

G4 Key programing is now available on the EZ LYNK platform. The hardware doesn't lock to individual machines, this will allow you have one in your group to take care of your all sleds. Read and clear engine codes , datalog, ECM flashing, etc. If you already have an Auto Agent 2 or 3 all you need are the BRP cables.

G5 keys are in the works.



There is danger. On the other hand, having one key for all machines will greatly simplify the process of maintenance and monitoring. I even now started reading about how to create a management system, I use https://ddi-dev.com/blog/programming/how-create-online-learning-management-system-scratch/ for this. It's actually a very cool idea if you think about it more broadly. It will be possible to make changes to the ECM firmware without unnecessary complications.

It turned out to be a very informative video. Is there anything else similar?