Digatron question

[Volvokvaloya]

I will install my 2 window EGT Digatron tomorrow on my 04 Vertical Escape,and i`n wondering where you guys use to hook up the B+ wire on the sled?

 

[Daggerboat]

I powered my old Digitron DT-32 on my '02 edge from a connector near the voltage regulator behind the secondary clutch above the left footwell (yellow wire)....This gauge only has 2 wires....Do the newer Digitron have 2 or 3 wires to hook up ?

 

[Volvokvaloya]

Thanks man!!

My Digatron also only haves a B+ with a fuse on it and a ground wire.

And the 2 egt`s.

Did you find any good place near that to ground it?

 

[F-Bomb]

You have the a/c harness (2 wires one red pos one black ground)...follow daggerboats instructions for that sled.

Digatron Red to Polaris Yellow
Digatron black to ground
seperate your egt wires a minimum 1" (no coiling...do not line them along with the extra power up to the box...keep them seperate...we use plastic wire loom that works great)

Go to www.f-bombracing.com...read and follow to the procedure to the T that is on the tech page on working with your Digatron and understanding reports. Learn to read plugs effectively or the Digatron is just a metal box with lights and zero value.

 

[Volvokvaloya]

F-Bomb: Do you sell digatron parts?,for example new wiring harness,EGT sensors and EGT clamps?

 

[Daggerboat]

Thanks man!!

My Digatron also only haves a B+ with a fuse on it and a ground wire.

And the 2 egt`s.

Did you find any good place near that to ground it?

The voltage regulator mounting bolts work good for the ground