Cutting out.. Easy Fix. To TRY..

[NapaMatt]

Some easy to try..

I had issues with cutting out. Falling on its face!

Try switching Plugs Over to Champion RN57YCC

Worked for me. Finally i got a day of riding in with out falling on its FACE!

 

[crf118r]

That's good to know. I switched plugs (same NGK's) two weekends ago and when I started my sled, it wouldn't run worth a crap. I gaped them to .027 like I do on all my sleds. I checked the stockers after that and regaped them to .025 and it ran fine. Had my first bog yesterday, though, going to wot. Seemed like it kinda did it one more time, but that was it. Not happy about it. I'll be keeping an eye on it from here on out. What gap is everyone else running??

 

[pura vida]

in another thread "they" were saying to lower the gap to .18 to help with the problem. i don't have the problem so i haven't messed with it.

pv

 

[srosscojw]

400 miles, original plugs, had my first and only wide open throttle cut out yesterday. It was on the trail after what I would call extended WOT with very little engine load. never happened again but I will be watching very close.

 

[dub]

Eridium (sp?) plugs got rid of the blubbery stuff on the bottom end after low speed tree runs for me!

I still haven't had the "cut out" but I do like these plugs!

 

[CROW]

Eridium (sp?) plugs got rid of the blubbery stuff on the bottom end after low speed tree runs for me!

I still haven't had the "cut out" but I do like these plugs!

NGK Iridiums? If so what part number?

 

[GMCRMK]

NGK Iridiums? If so what part number?

NGK BPR9EIX

 

[C S Fever]

You are looking for the NGK Iridium BPR9EIX