Custom Rear Bumpers

[castlesledder]

Here are a couple of proto type rear bumpers:

Arctic Cat 1M / King Cat:

Production part of this bumper would have the tab for the cooler integrated as one piece with the bumper side.

Yamaha Viper:

Bumper sides: 3/16 diamond plate aluminum (can be smooth material) CNC cut.
Rear Tube: 1"x1/8 wall aluminum tube, jig bent
Fully welded, sandblasted and powder-coated, your color.

Bumper on Cat above will fit tunnel with no modifications, or tunnel cut as above. This bumper would be about $125. Bumper on Yamaha bolts into factory location, required minor cutting on rear plastics, $100.

PM me if you have an interest.

Also offer powder coating of small parts such as suspension components.

 

[gotwoofs]

Got anything for an edge chassie

 

[kidrman]

Your bumper looks great. I already have a BDX kit or I would buy one.

I would strongly recommend bringing the side pieces further forward so they can tie into the drop bracket mounts. I cracked my tunnel with the BDX kit and had to plate the inside.

 

[castlesledder]

Your bumper looks great. I already have a BDX kit or I would buy one.

I would strongly recommend bringing the side pieces further forward so they can tie into the drop bracket mounts. I cracked my tunnel with the BDX kit and had to plate the inside.

Thanks, I'll incorporate that into the next one. I did plate the inside with 1 1/2 by 1/8 flat aluminum stock, having heard some of the crack stories. So far so good.

 

[travisbsbl]

I like the looks of the one on the Arctic cat.. Nice work.. Might hit ya up for one..

 

[Zerrman]

tunnel pics

Here is a couple pictures of my sled were i moded in my garage for about $20 bucks.

 

[Bbturbo_]

tunnel pics

Here is a couple pictures of my sled were i moded in my garage for about $20 bucks.View attachment 93937

View attachment 93938

View attachment 93939

View attachment 93940

Dude that looks amazing! Did you shorten the tunnel any? I'd love to do something similar to mine but make it shorter