CLUTCHING HEADACHE

[BOOSTEDTURBO]

I have a turbo nytro powder lites kit, put a boosted kit on it, and now its banging off the rev limiter . Running 8bu weights with steel rivet in both holes,blue pink blue srping and stock secondary 20 /40 gearing 162 track
I know or think i have to put weight in primary, any sugestions

 

[towerrigger]

Try the MPI brass rivets.

What size rollers are you running?

 

[BOOSTEDTURBO]

Thanks , running the 14mm rollers

 

[BigFish BC]

get yourself a set of dalton ajustible weights how much boost are you running.

 

[BOOSTEDTURBO]

17 lbs , right on the edge

 

[Thistledoo]

ya mpi rivots would be your easiest route

 

[summitboy]

What altitude for 17psi ? What spring is in the secondary (wind), stock i'm guessing ? Pump fuel ? Stock pistons with head shim ?

8BU with MPI rivets will get you close if your 17psi at altitude (270ish HP). Daltons are good but i think the 8BU works better imo. I run Daltons now and am going to make a set of 8BUs for my Apex next season. Had them both but couldn't make the 8BU heavy enough back then lol

 

[BOOSTEDTURBO]

Yes at altitude 17 lbs ,stock secondary ,14 mm roller blue pink blue primary,headshim, 50 /50 gas 2 to 1 gearing and 8bu with steel rivets .

think i got enough information now , got some more parts and headed to the hills one last time this year.

Thanks everyone for your help