to i need a clutch puller to remove my clutch from the motor on my sled
1995 zr 580
1995 zr 580
clutch help
- Thread starter nickpog
- Start date
You need a clutch puller of some kind to get it off! If its been 10 years since its been off, be cautious, problably going to pull hard, search the " tough clutch to pull " threads here on SNOWEST on using some oil and puller and teflon tape to pull with help of some hydraulic pressure.
If the clutch is junk and you need to take it off, you can VERY CAREFULLY cut it off..Dremel tools etc , time consuming but safe bet, IF YOU HAVE blacksmith tendencies, I've seen guys slobber then off with a cutting torch, but no whining if results are not good.
If the clutch is junk and you need to take it off, you can VERY CAREFULLY cut it off..Dremel tools etc , time consuming but safe bet, IF YOU HAVE blacksmith tendencies, I've seen guys slobber then off with a cutting torch, but no whining if results are not good.
If you cant get ahold of a puller, find a bolt that will fit and use lots of antisieze on it and pump the crank end/clutch full of grease then thread the bolt in. I find that works good when i dont have access to a correct puller. Like said above if its been 10years since its been off, it will prob. come off really hard.
thanks for the info i am going to bring to the shop
