Change your ride. Kits in stock. 34.5"
- Thread starter Barcode
- Start date
K
klarkkentster
Well-known member
Sorry if I missed it - what all is included in the kit? A arms and spindles?
wildcard28
Well-known member
Does it measure 34in ctc of spindle or carbides witg skis in narrow position like skidoo expert is there ctc at spindle are beleive actualy 35in. ?
Sent from my SM-A526U using Tapatalk
Sent from my SM-A526U using Tapatalk
wildcard28
Well-known member
I know the newer gen4 has 2 spacers so you canove the skis to basicly 3 positions, I happen to measure my 22 summit x last night on shop floor the spindle ctc was 36 3/8. My 14 Xm is 36 probably shock settings or weight but pull the front suspension up on gen4 it was 36in.
Was just curious if your frontend install with spindle ctc 34in cause thats how it should be measure, where ever ya put the skis is a position measurement you can put that anywhere
So S36 and to current frontends measure 36in ctc.
They advertise 34in on the expert when its 35in ctc and 34 skis narrow posirion to me thats false advertiseing
Sent from my SM-A526U using Tapatalk
Was just curious if your frontend install with spindle ctc 34in cause thats how it should be measure, where ever ya put the skis is a position measurement you can put that anywhere
So S36 and to current frontends measure 36in ctc.
They advertise 34in on the expert when its 35in ctc and 34 skis narrow posirion to me thats false advertiseing
Sent from my SM-A526U using Tapatalk
The kit was build as a 34" ctc kit. With the thread heims we have some wiggle room to adjust and play with the camber and castor. The way we ended up with was 34.25 as close to true ctc
As we have it set up in our instructions were at 34.5 ctc on the spindle but your welcome to adjust to suite to oyu what you want.
As we have it set up in our instructions were at 34.5 ctc on the spindle but your welcome to adjust to suite to oyu what you want.
wildcard28
Well-known member
Cool, good to hear.
Sent from my SM-A526U using Tapatalk
Sent from my SM-A526U using Tapatalk
wildcard28
Well-known member
Do you build a spindle forward frontend kit for the Gen4?
Sent from my SM-A526U using Tapatalk
Sent from my SM-A526U using Tapatalk
wildcard28
Well-known member
I meant , Do you offer a Frontend kit that movves the spindles farther forward, kinda like the Skinz frontend.
Sent from my SM-A526U using Tapatalk
wildcard28
Well-known member
5in forward / 34in ?. Your kit uses stock shocks?
Sent from my SM-A526U using Tapatalk
Sent from my SM-A526U using Tapatalk
wildcard28
Well-known member
Cool, thanks for info. Ill be ordering one your kirs in off season. [emoji106]
Sent from my SM-A526U using Tapatalk
Sent from my SM-A526U using Tapatalk
