chaincase polaris widetrak

[LOLO21]

hello
I have a little problem with my Polaris widetrak 600 IQ 2010. the chain rubs in the chaincase, there is no chain tensioner provided on the OEM exploded view, I would like to avoid changing the chain, and there is has a screw location, what tensioner could I put?
I found a model but I don't know if it is suitable

thank you
https://www.kenssportspolarisparts....rive/5e0fa0a087a8660e24ce8b02/chain-tensioner

merci

 

[Little_fellow]

Did you Find a solution for your problem? I just purchase a used 2010 IQ 600 Widetrak and I was researching to see if I could help you. I'm not sure if this can help but if you go to the Polaris parts online sight , it will give you an exploded view of the chain case . You might be able to figure something out just by looking at the diagram. Also, in the owners manual, on page 82 in my manual, talks about coupler lubrication on the driveshaft and that the jackshaft is all in one peace and doesn't require maintenance.

 

[volcano buster]

Have you had the cover off to know how the roller/guide needs to fit?
Some have a pivot stub that the roller frame hinges on and some have guide rails that the assembly rides on as tension is applied with the bolt.

 

[LOLO21]

no, I haven't found an answer to my problem, there is indeed a pivot for the gears, but nothing to tighten the chain, it is on fixed sprockets, I think the chain is slack with wear.
I will change it if there is no other solution

thanks very much

 

[Little_fellow]

no, I haven't found an answer to my problem, there is indeed a pivot for the gears, but nothing to tighten the chain, it is on fixed sprockets, I think the chain is slack with wear.
I will change it if there is no other solution

thanks very much

Thanks for the update. If you do anything about it , could you post it on the forum. I am interested in this in case I get the same problem down the road. Good luck.

 

[Little_fellow]

Have you had the cover off to know how the roller/guide needs to fit?
Some have a pivot stub that the roller frame hinges on and some have guide rails that the assembly rides on as tension is applied with the bolt.

Does the cover come off without disassembling the whole chain case ?

 

[volcano buster]

It should. Drain it first and watch the gasket/seal so you don't damage it.

 

[Little_fellow]

It should. Drain it first and watch the gasket/seal so you don't damage it.

Thanks. I'll check it out.

 

[Little_fellow]

Thanks. I'll check it out.

Good to know. Thank you. On the Polaris Widetrack LX you have to dismantle allot of stuff to get to the inside of the transmission.

 

[Blancheeron]

It should. Drain it first and watch the gasket/seal so you don't damage it.

 

[Blancheeron]

It should. Drain it first and watch the gasket/seal so you don't damage it.

Speed Test​