Can a 133.5" track be used with 136 M-10?

[AKrider]

I'm in the process of installing an M-10 in my Vector. It is a factory 136 M-10 but I've also got an older 133.5 Polaris track laying around. Does anyone know if it would fit and work okay? The tech guy at FAST is out today and won't be back until Monday.

 

[AKrider]

Anyone know? I'm wondering if the skid can adjust for the 2.5" difference? I don't want to go through all the work to install it and find out the track will be too tight.

 

[Avs man]

not unless you modify your rails

did try the same thing, to mount the skid far enough foward for the track to work we had to cut about 1.5-1.75in off of the front of the rails to make it work front of rail will hit the drivers. It can be done its just not the right way to do it.

 

[AKrider]

Thank you very much. I won't go this route and instead pull a 136" track out of another sled I have.

 

[captjacksparrow]

It definatly won't work but it's not the rails that will cause the problem, it's the front arm. The arm itself will be too close to the drivers.