C&A Outlaws on 09 IQ-R?

[High Idle]

Anyone else having a tough time putting Outlaw skis on the 09 IQ-R with the new spindle? For some reason I can't get the spindle and ski holes lined up. I had to cut the mount out a bit to clear the carbide. Any help would be great.

Thanks

 

[kssnow987]

use the stock pad as a template. then carefully trim away the rubber. try to keep the same angles. C & A didn't have time to make a new pad.

 

[kssnow987]

I ended up taking 1/8" off of the bottom of the stock C & A pad and then trimed where the back of the spindle hits the pad about an 1/8. Hope this helps

 

[High Idle]

Thanks man. What a pain tho!

 

[High Idle]

For any one elses info, I had to take a little more than an 1/8" off and ya as said before had to trim the back. I am running outlaws so i had to take more off than an 1/8" i was able to use the blocks on any other c&a ski.