Broken turbo Y pipe springs

[sno-addict]

This weekend both of my bottom springs on my Y pipe broke. Had to steal one of my buddies sled to finish the ride. The springs are the ones that come with the MTNTK turbo kits, they are a typical turbo spring. So my question is there a way to keep these from breaking?

 

[Spaarky]

Go to a OVS or Turbo Perf type fitting on the connection. That will cure it, no more springs.

I don't know how to describe the bolted spring clamp. They work very well.

 

[gilmoreb]

I also run a MTNTEK and had the same problem. I have doubled all of my springs except the two that are on the cam at the exhaust can. I use the Polaris SS springs PN 7043726. No problems since.

 

[skibreeze]

Put a dab of silicone on the springs, it will dampen the vibrations the eventually cause the springs to break.

 

[JMCX]

I too am having this problem with my Mtntk kit. Basically, every trip I break a spring. After the first time I did the silicone trick but it made no improvement. I have never broke two at once and don't notice any performance loss with just one missing (6-7 pounds boost). I phoned Mtntk but the guy I talked with wasn't aware of any problem. I will say, my engine has a lot of vibration at 3000 RPM. This is a 2015, my 13 Pro is smooth.

 

[sno-addict]

Yeah I have used the silicone too, both my springs didn't go at once, and my motor seems to run very smooth. I know cutler has some turbo springs was thinking about giving them a try. Also going to give the Polaris SS springs doubled up a try...or use the cutlers and keep the SS springs in my pack for backup