Break sled in before puting can on or not??

[testee]

Have heard different opinions on this. What u guys think?

Have new pro coming and hps can. Should I break it in before putting the can on or throw it on right away.

Some people say wait till break in is over or let it buck right away

Thanks

 

[gmustangt]

Id put it on right away, just a can...

 

[Oregonsledder]

Have heard different opinions on this. What u guys think?

Have new pro coming and hps can. Should I break it in before putting the can on or throw it on right away.

Some people say wait till break in is over or let it buck right away

Thanks

I have not yet heard any info on the impact on the back pressure related to using the HPS or any other after market can. If it was me I would want a base line of running experience before subjecting a new engine to the unknown. I suspect there is minimal impact on the burn characteristics with most after market cans, but I would want to know for sure before taking an unnecessary chance.

 

[joshua335]

My MBRP can is on my brand new sled... I'm not too worried.

 

[granto]

i just got the first 50miles on mine with a jaws can it ran flawless i wouldnt be worried.

 

[Covelli44]

Had a Ski Doo and put a can on from the start with no problem. I did make sure there was no need to adjust anything with the change in the can.

 

[bootz1981]

i put a jawz can before my dealer had it all the way set up, never heard it run with the stock one, couple hundred miles with not 1 prob of any kind, let-r-buck

 

[sled-fiend]

HPS on my 12 right from the get-go

 

[enis750]

Put mine on from new

 

[Rick!]

Put my can on with 0 miles that was connected to a new pipe that is connected to a new head which connects to a PC gizmo. Runs great. No worries mate.


Sent from my iPhone using Tapatalk

 

[Boston Racing]

I put a turbo on to break it in....A can will be fine.