Boondocker #'s for Bikeman Pipe set

[Saddle sore]

I got an 07 M1000 with 162 powerclaw. Just bought a Bikeman Y-pipe, Fat Azz Pipe, Can and Speedwerx original high flow in-take.

Who has a similar set-up and whats your Boondockers numbers?
What RPM are you running?

 

[Saddle sore]

Some one has to have the same setup.

 

[OLD SCHOOL]

M1000 boondocker #

08 M1000 2000 ft elevation in alaska.
3k -2-0-0
5k -1 -1 -1
6.5k 0-0-0
7.2k +5+5+5
7.5k +5+5+5
7.8k +8+8+8
This is what i am running now there suggested numbers were way to rich for my sled. I still have a 5k bog that i am still trying to get rid of.
Exhaust temps around 1100-1150.

 

[Pieguy]

Old School, drop your 6500 numbers a little like -3-3-3 or so.

 

[quickkarzracing]

i think your higher #'s are a little lean ,i was told nithin lower than 18 on the high setting after 7200,pull a plug on each side after a decent pull thats one way to find out your egt's seem alright though.

 

[dogtownbutcher]

i know this is an old thread, But , anyone else out there running the bikeman pipe? I went out today and had a pretty good bog around 5 to 6000 rpms range, the recommended settings seem extremely high! Anyone? thanks