bmfab AXYS boards on my pro

[Angermangement890]

Still have two skis, shooting for a 37" front end and possibly a bit forward. Gonna make my own arms with some bent ones laying around.

Bryan, did order up a rush bulkhead cooler too I know we talked about that and figured not worth the risk of running hot. As the pictures show, the bottom of the stock coolers are cut out and you can see the back of the mini cooler in the tunnel.

The rush bulkhead cooler is significantly different than the RMK, different angles on the piece, your better off using the RMK/SBA 144 front cooler.

 

[roni87]

rush cooler

Here's my plan as done by fastrax before. should cool better than a stock rmk or sba one as there is more cooling surface up by the jackshaft.

 

[B&M Fabrications]

Did a little digging and measuring this morning. The axys boards will end up being adaptable to the pro with some minor work. So now we just need to hurry up and get those ironed out and into production. We met with the machinist this morning to get some more of our machined parts finalized and produced, so hopefully next week we will be looking pretty good on these.

Bryan

 

[mountainhorse]

I moved all of Sheetmetalfab's info/pics to it's own thread (deservingly)

http://www.snowest.com/forum/showthread.php?t=398879