Big Wheel kit????

[SHEFFY40]

Big Wheel kit Question????

My Xrs came with a rear big wheel kit on it and has the wheels mounted on the inside.I have a bunch of buds that are telling me to move the wheels to the outside otherwise the track could break while jumping as there is too much stress in the middle of the track????....any opinions....Thanks!!

 

[Rixster]

Tell your buddies that they are crazy. There are lots of people that have gone to only inside wheels, me included. Had no trouble at all. And I really dont think that polaris and arctic cat would send them out from the factory with inside wheels if they were weak. Ride hard !!!! no worries about breaking them !!

 

[05900]

Buddies must not ride powder or carve to much???????

 

[SHEFFY40]

Thanks for the replies

 

[Dbook]

Leave them on the inside. I jump the crap out of my rev with big wheels on the inside. I worry more about breaking rails and wheels then the track.

 

[ragincajun]

what if you land on the back end and on the sdie a little? wouldnt it break the bars in the track since there isnt support?

 

[racingpit]

My Xrs came with a rear big wheel kit on it and has the wheels mounted on the inside.I have a bunch of buds that are telling me to move the wheels to the outside otherwise the track could break while jumping as there is too much stress in the middle of the track????....any opinions....Thanks!!

I would get a hold of Mountain Machines. They will treat you right.

 

[summitchaser]

My brother in law weighs about 250, he runs a inboard big wheel kit on a 16 wide track. He has never had a problem with jumping or dropping cornices.

 

[SHEFFY40]

Leave them on the inside. I jump the crap out of my rev with big wheels on the inside. I worry more about breaking rails and wheels then the track.

Thanks for the help.....AWESOME PIC