best 1000 for 2010 m8

[aksnopro]

got 1000$ to spend on my 2010 m8, what you guys think?

already have HD skid plate mbrp can, and iceage rails.


powder pros? they really worth 450?
clutching? im happy with the rpm its pulling would just like it to backshift smoother.
motor? whos got a picture of the oil pump spring addition?
i dont want to run any controllers and im happy with the torque and pull.

what tools do i need to check the belt deflection, alignment and sheave clearence? and who makes a quality cheap tool?

-aksnopro

 

[IceCap]

If its running strong...... I would leave it and use your $1000.00 for fuel and have fun riding.

 

[columbus]

Powder Pros are worth the money

 

[XFIRE800]

I got my powder pros for like $315 new off of here. 2 cool side vents, gauge cage, shift assist, float canisters, mountain addiction gas rack, cat console pads, ice scratchers, amp 2 inch forward riser, diamond lite drive, and lightweight brake rotor to name a few options for you. I love my powder pros and think they are worth the money.

 

[Alaskan_awd]

I have't done anything I'm not happy with yet, 2 Cool side vents for sure, they look very nice and I did some tree bashing the other day, I guess they are strong because nothing poked through them, amp gauge cage, amp riser, frogzskins hood vent covers (get rid of those metal clips), bdx anti-stab kit, powder pros, rotopax gas cans, tether, sidekick scratcher, can and skid plate which you have already.

Tools (1.507 clutch alignment bar I think it's like $8 from AC, clutch puller, etc) I need to get a puller and I want an adjustable deflection tool from bdx or amp so I dont have to carry a bunch of shims.

To check the belt deflecton you only need a flat bar of some sort and a ruler.

 

[Monty]

powder pro's and diamonds hood

 

[aksnopro]

roger that! thanks, i heard there was an updated clutch allignment tool for the 2010 didnt want to get the wrong one.
so i will probably get the powder pros,
and thinking about a vholdr hd helmet camera.
all the clutch tools
and thinking about an intake, and maybe selling my mbrp exhaust and going with a tunnel dump... hm im really skeptical about cutting my tunnel right where i bent a bulkhead on an old m7 right by my feet similar to where this goes into the bulkhead.

whast the advantage of the canisters for the floats and the shift assist?
-Aksnopro

whats a good adjustable weight set i can use, most my riding is at placer,turny, petersville, which is 0-3000 but then i head down to paxon,valdez a few times a year also. right now its pulling 8150 perfect at 0-3000.

I have't done anything I'm not happy with yet, 2 Cool side vents for sure, they look very nice and I did some tree bashing the other day, I guess they are strong because nothing poked through them, amp gauge cage, amp riser, frogzskins hood vent covers (get rid of those metal clips), bdx anti-stab kit, powder pros, rotopax gas cans, tether, sidekick scratcher, can and skid plate which you have already.

Tools (1.507 clutch alignment bar I think it's like $8 from AC, clutch puller, etc) I need to get a puller and I want an adjustable deflection tool from bdx or amp so I dont have to carry a bunch of shims.

To check the belt deflecton you only need a flat bar of some sort and a ruler.

 

[Alaskan_awd]

roger that! thanks, i heard there was an updated clutch allignment tool for the 2010 didnt want to get the wrong one.
so i will probably get the powder pros,
and thinking about a vholdr hd helmet camera.
all the clutch tools
and thinking about an intake, and maybe selling my mbrp exhaust and going with a tunnel dump... hm im really skeptical about cutting my tunnel right where i bent a bulkhead on an old m7 right by my feet similar to where this goes into the bulkhead.

whast the advantage of the canisters for the floats and the shift assist?
-Aksnopro

whats a good adjustable weight set i can use, most my riding is at placer,turny, petersville, which is 0-3000 but then i head down to paxon,valdez a few times a year also. right now its pulling 8150 perfect at 0-3000.

Not sure about the clutch weights, clutching is something I have yet to really mess with or know much about. I am also pulling 8150 and happy with it too so I don't think I want to mess with the weights and screw it up lol.

I also want to get a helmet cam but I was looking at the new Go Pro HD cam, haven't really looked at the Vholdr but I hear it's nice.

A tunnel dump would be nice but I hear they are a pain to install, not sure if it's worth it or not, it might be if you bog real bad in deep powder I guess.

 

[aksnopro]

hm

250 bucks down so far

ordered bdx anti stab kit
bdx fox zero pro bogies (im elinating the inner bogies, this will help with hyfax wear, i hate scratchers)
bdx diamond drive bearing kit. (ill need it adventually lol)
two crossbars i will place throughout the iceage rails for extra support.

now where to find the best deal on powder pros and which model is the best?
-Aksnopro

 

[ripsass]

Install that big bearing as soon as they get here.

SHift assist

Powder Pro's

Venting


I love my AMP gauge cage and riser.

 

[shredjim]

Powder pro is the name of the ski by SLP. You only have to pick the color, not model. PM Free Agent here on snowwest - Michelle will take good care of you and get you the good price! She has all the clutch tools in various third party mfg's that work just as good but are cheaper.

 

[aksnopro]

roger that, powder pro's ordered up,

and now for all the clutching tools.