Bent lower A-arm 07 summit.

[Shake]

Hit a rock today and bent the left side A-arm. The A-arm bent on the backside. I estimate the left side ski is pushed back 2-3". I rode the rest of the day without any problems. Couple of questions.
1. How do I tell if the bulkhead is bent?
2. How big of a pain is changing the lower arms?
3. Where is the best place to get an OEM A-arm?
Thanks

 

[nathaniel11]

to see if the nun is bent you can sometimes tell by just opening the side panels and looking at the supports. since you hit it on the left check on the right side by the can and see if you popped any rivets. Changing the a arm is pretty simple. and to find a you can go on ebay there is usually alot of lower a arms.
just my .02 cents