BDX rock rollers rkt secondary junk???

[cat rider]

You should use an ac snopro green or ac red/white. I'm using the snopro green, it worked great up until the rollers broke anyway.

 

[Sparx]

Has anybody tried Hitorque Rollers? I'm thinking about giving these one's a try when my stock one's fail, so far so good at 1350miles of hard riding!

http://www.hitorquerollers.com/

 

[JHG]

Has anybody tried Hitorque Rollers? I'm thinking about giving these one's a try when my stock one's fail, so far so good at 1350miles of hard riding!

http://www.hitorquerollers.com/

I haven't used them but I just use the stock rollers. I haven't had any issues. I replaced them this summer because I had the clutch apart and when they came out they looked fine. Sled had 1600 miles on it.

 

[rcr1978]

What do the old ones look like? Is there a noticeable difference in look between the old and new. Hopefuly I have new ones.

 

[BCP]

I use a set of Hi-torque rollers on my 1150 and they work great, have also used them on a F-7 and they broke. Currently have 2 seasons on a 800 with the CPC conversion and Aerospace rollers, these are what I now have on the 1000 and am hoping they work just as well. Like you guys I like to try different products to see if there is any performance difference (if the pocket allows) yet it is still frustrating when you try a part and it works on one sled great and will not perform on another and there is no "good" explaination! RK Tek conversion - green sno pro spring pulls great!! This season I have tried stock 2ndary, RK Tek converion, D&D conversion and D&D compression with adjustable cap.........By far, RK Tek conversion paired with Dalton weights will out pull the others - NO question!! Drag and Flys from Super Torquer are a "DRAG" not a "Fly"!!! Not a bash just a fact in side by side comparrison.

 

[Killerk]

Thanks thats the answers i was looking for. On the rollers, Kelsey said that it only comes with 3 rollers and the 06' M7 has 6. Whats up with that? Also what torsion spring should i use with this kit. I at 0 to 5000 feet but so time run at heighter elavation when i head to BC.

You only need to replace 3 rollers... The other 3 are more like "idlers" they don't have much load on them.
Be sure to follow the directions to be sure you replace the correct ones.
A cutler red/white would be a good spring choice also.