Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

bad acceleration Hawk 04 600

Hello everybody!

I have a bad acceleration and it seems to me that the carbs get no fuel...also the tube is banded near the tank.

How i have to pass the fuel tube from the tank to the carbs? Can anyone send me a foto.

Anyone a idea what also can be, what i have to modify at me Hawk 04 600HO?

Thank an greats from Austria!!
 
Hallo Ostereich,
Wilkommen zum unsere Stammtisch!! Wo konnen Sie Sein Hawk fahren? Welches stadt wohnen Sie? Tirol ist eins von meine lieblings Lande zum schifahren.

Are you the first owner of the machine? Do you have tools? Do you have mechanical skill? Can you get parts? Is your service manual in english, french, or german? The usual things on the '04's are:

The fuel line always bends a little bit when it comes out of the tank and goes over to the fuel pump. If the line gets caught between the tank and mounting bar, it will pinch and stop fuel.

Airbox or just filters on carburetors?
Jetted for your altitude?
Clutched for your altitude?
Good premix and gas in the tank?
Compression check?
If all that is good:
Pull the carbs and reed blocks and check reeds if they are closed or if are warped open a couple of milimeters, open is bad.
With the reed blocks off, pull the sparkplugs out and move the pistons up and down to see if they are scuffed.

I'll think of more...
 
Thanks for your help,

"jockey": Ihr deutsch ist ja nicht schlecht. Ich wohne im LECHTAL in der Nähe von St. Anton und Lech am Arlberg und wir haben POWDER

i have changed the line position and see there what happens? it works better.

I'm the first owner of the machine no rust on it; the machine is excellent cultivated.
My manual is in english, is there a german one?

Airbox
What do you propose for 1100m and -5°
Clutch is factory setted what do you propose with 136" track and were can i get the parts?
ROZ98 Octane and Valvoline Oil
Compression OK
Reeds Ok

I think i have the old piston rings! Should i replace them...? if yes how can i get them in Austria?

In March i stay in Manhatten for about 2 weeks for work! Is dear a dealer?
 
Premium Features



Back
Top