B
bustamove
Active member
i just completely rebuilt this sleds top end. new cylinder, pistons (dual ring), new boots, reeds, new plugs.
i don't know what it should sound like cuz i got it off a guy that apparently rebuilt it but the ring clipped a port about 20miles later.
so i started it for the first time and it seemed to sound like it was running on one cylinder, both jugs felt warm equally, it got a little better when warm.
i was just brapping the throttle ever now and then and as it got warm it sounds like it backfires/or cough between 3000 and 4. and it takes a bit to come back down to idle now.
also i had to turn that screw quite a few times to get it to idle or eles it would die and beep 10-9 at me
trying to upload video, anyone know a good site?
i don't know what it should sound like cuz i got it off a guy that apparently rebuilt it but the ring clipped a port about 20miles later.
so i started it for the first time and it seemed to sound like it was running on one cylinder, both jugs felt warm equally, it got a little better when warm.
i was just brapping the throttle ever now and then and as it got warm it sounds like it backfires/or cough between 3000 and 4. and it takes a bit to come back down to idle now.
also i had to turn that screw quite a few times to get it to idle or eles it would die and beep 10-9 at me
trying to upload video, anyone know a good site?
