Back firing

[mountainhorse]

If that is not it... check your compression...

Those are also symptoms of a bad piston.

 

[faulk222]

Turns out the banding on the inside of the fly wheel came lose. Simple fix!

So here's what I found the ohms for the white/greengreen s/b 190 i get 0
green red / brown white s/b 15 i get 26.5
Green red / green yellow s/b 15 i get 12.3
white / white red s/b 190 i get 180.5
the rest are normal

New stator needed right?

if this is correct then the inner sleve has cut your wires and you NEED to repair them

 

[Chris the sled guy]

I pulled the flywheel and have not found any cut wires. Just the lose sleeve inside the flywheel...

 

[faulk222]

recheck white/green to green for 190 ohms if you got 0 then you still got a problem

 

[Chris the sled guy]

So new flywheel four pull starts right up but wants to idle at 1250 rpm. Its supposed to be 1600 or so right? Feels real responsive to the throttle just like normal. Tps ???

 

[rmk2112]

TPS setting or the TPS harness itself.

I have a new, in the bag harness if it's bad or you want to change it out.et me know if you do.

 

[Chris the sled guy]

That's cool you live real close too...Pm me your number please.