A
absoluteapex
Member
can't find the timing marks on the Avid extroverts,whats up?
avid extrovert timing marks
- Thread starter absoluteapex
- Start date
Ours didn't have any, just a black pen mark. Or just find where they are in time and make a mark.
Just black pen marks on mine also
A
absoluteapex
Member
thanks for the help guys
timing
mine had arrows wich i aligned but... they are obviously not. so how would one find "in time" with these
mine had arrows wich i aligned but... they are obviously not. so how would one find "in time" with these
timeing marks
I usually mark one anti-ratchet point with a sharpie. Make sure that each driver is rotated so that the marked points are in the same position. If you don't have a mark on either one. Mark one point on the first driver. Rotate the second driver until the outer points and the inner shaft holes match the first one. If you have any question call 1 866 666 Avid or out side the U.S. 1 406 253 0979.
I usually mark one anti-ratchet point with a sharpie. Make sure that each driver is rotated so that the marked points are in the same position. If you don't have a mark on either one. Mark one point on the first driver. Rotate the second driver until the outer points and the inner shaft holes match the first one. If you have any question call 1 866 666 Avid or out side the U.S. 1 406 253 0979.
Similar threads
