looking for a setup for 660-800ft
running stock gears...23/29
stock 10-66s weights
cobra track
black/white primary(140-320)
red/pink secondary(140-260)
66/44/46 helix
should i go to a lower ratio? 1.80-2.00? and hope it pulls harder if i done this? from 0-finish
should i try loading it with heavier weights? with stock setup i rev 8250-8300 and with theses springs im reving 8100-8150
on tac i read 93mph in 660
as you can tell probly i have no idea when it comes to clutching lol
also ive looked through the forums and just havnt found any setups or answers i would need for 660-800ft
race
running stock gears...23/29
stock 10-66s weights
cobra track
black/white primary(140-320)
red/pink secondary(140-260)
66/44/46 helix
should i go to a lower ratio? 1.80-2.00? and hope it pulls harder if i done this? from 0-finish
should i try loading it with heavier weights? with stock setup i rev 8250-8300 and with theses springs im reving 8100-8150
on tac i read 93mph in 660
as you can tell probly i have no idea when it comes to clutching lol
also ive looked through the forums and just havnt found any setups or answers i would need for 660-800ft
race
Last edited:
