anyone running the turboworks kit for the nytro?

[lightening800]

i may be getting this turbo kit and am looking for people who have this kit and can give me some feedback on it, ive read all obout the mcx, synergy, inpulse etc and am only interested in hearing about this kit please. Thanks

 

[Parker]

I may not be quite ready yet but don't count me out.

www.parkermotorsports.com

Check out the pics of the kit in the photo gallery.

 

[summitking]

I havent heard about turboworks got any details? Website etc?

 

[SLY]

Have only seen that system on a Rev. It was being ridden by Jaret(sp) from Absolute(St Albert) He sells turboworx and should be able to point you to someone, if there are any out there. Keep your fingers crossed that it has the same type of gas and go controller as the MCX (just plain works) that you don't have to keep adjusting and watching A/F ratios.

 

[lightening800]

different turbo kit

Have only seen that system on a Rev. It was being ridden by Jaret(sp) from Absolute(St Albert) He sells turboworx and should be able to point you to someone, if there are any out there. Keep your fingers crossed that it has the same type of gas and go controller as the MCX (just plain works) that you don't have to keep adjusting and watching A/F ratios.

this guy only builds the kit for the nytro and its turboworks not turboworx his website it nwturboworks.com.

 

[PUNISHER]

All of the Yami dealers in this area are talking about this kit. The Yami marketing rep that visits the dealers has been bringing around the info for them to look at. Supposedly (from what I've been told) Turboworks is a Yami dealer and hence the support by the marketing rep. I don't know of anyone running the kit around here, and they are somewhat local.

 

[BigFish BC]

web site does not work

 

[Spud]

try Central MT Yamaha-Arctic Cat @ 1-406-538-8494
they do turboworks nitros...
http://www.cmyac.com/

 

[HYFLYR]

Website says no cutting drilling or anything, just install in 4 short hours. Man, i wish all my installs went that fast. Looks like a nice kit though, im thinking it doesnt come with a headshim though or am i mis reading something.

 

[BigFish BC]

Website says no cutting drilling or anything, just install in 4 short hours. Man, i wish all my installs went that fast. Looks like a nice kit though, im thinking it doesnt come with a headshim though or am i mis reading something.

how did you get the website to worky.?

 

[bigbird]

this guy only builds the kit for the nytro and its turboworks not turboworx his website it nwturboworks.com.

off topic, but i think Absolute is boostworx turbos

 

[lightening800]

T

how did you get the website to worky.?

type it in at the top as www.nwturboworks.com, dont use a search engine just do it direct.

 

[SNOW JW]

One thing that I did not like was the smaller gas tank 7Gal I think. Also no on the snow testing time as of Dec when I called him and stage 2 and 3 was not fabbed up yet or even in the proto stages.

 

[Spud]

same turboworks

cmyac is also doing the same exact kit, $4500 installed for stage 1.

 

[Sunridge Sledhead]

Does anyone know anything more about testing on this setup? Also, if he has the stage II or III on the snow yet?

 

[Mountaintech]

Not much info on website.

 

[SNOW JW]

Rode with a guy named Ryan Gunther this weekend he said two weekends ago he and another guy towed the NW turbo kit out said something with the EFI was all haywire???

 

[bumblebeast]

I'm running the kit on my nytro but haven't had much snow time because of an injury. Stage one is only 8lbs. of boost and is a very clean install. I'm going to have a friend ride it this weekend to get a little more time on it and to see if we are going to have to work some bugs out, but I don't see any problems with this turbo. I have some time on it and can honestly say that stage 1 is a handfull and don't know why you would want anymore power. And yes it doesn't take very long to install and there is no hacking and cutting on this kit. These guys(NW turbos) know what they're doing!!

 

[lightening800]

turbo

I'm running the kit on my nytro but haven't had much snow time because of an injury. Stage one is only 8lbs. of boost and is a very clean install. I'm going to have a friend ride it this weekend to get a little more time on it and to see if we are going to have to work some bugs out, but I don't see any problems with this turbo. I have some time on it and can honestly say that stage 1 is a handfull and don't know why you would want anymore power. And yes it doesn't take very long to install and there is no hacking and cutting on this kit. These guys(NW turbos) know what they're doing!!

This is good to hear as im leaning towards his kit as well, i like the easy install and i can upgrade it later if i want to, nate is a real nice guy and knows his sh$t ihe gave me a number of a guy who took kis demo out this weekend and the guy said the sled worked awesome 0 turbo lag and pulled hard right from the get go, which im looking for for the days of boondocking in tight trees, ill keep you all posted when i get it here and how the install went. As for the gas tank the person who rode it last weekend put 70 miles on it on sat and he said he dumped in a jerry can and it was full, he said you find yourself not holding it to the bars like you did when it was stock so the fuel thing isnt a big deal, just carry a 2 gallon gas can like i do anyway with any of my sleds.