Bought a set of the Burandt bars which I do not like. Ended up feeling to low for me. Looking for a place with the 7" in stock to try.
Thanks
Thanks
Anyone know of anyone with RSI 7" in stock?
- Thread starter tmberro
- Start date
The stock Pro-Tapers are 7" tall... I'm not sure about the bend since I've not had them next to each other...
Wade...Any thoughts on this?
Are the RSI's narrower or have a different sweep/rise than the stock PT's?
.
Wade...Any thoughts on this?
Are the RSI's narrower or have a different sweep/rise than the stock PT's?
.
@#111, How tall are you? I am 5' 10 and considering these bars...Pro tapers feel too wide and I'm not crazy about my arm position. Thanks!
I am 5'11"
I also felt the Pro Tapers were too wide and tall, so I wanted to try the 5" RSI bars. I cut a little over a half inch off each side to the RSI bars. I like the width, but the height is just too low. The height seemed to be fine for climbing and side hilling, but jumping and more aggressive riding I am too hunch over. I am going back to the 7" rise then cut the width down.
I also felt the Pro Tapers were too wide and tall, so I wanted to try the 5" RSI bars. I cut a little over a half inch off each side to the RSI bars. I like the width, but the height is just too low. The height seemed to be fine for climbing and side hilling, but jumping and more aggressive riding I am too hunch over. I am going back to the 7" rise then cut the width down.
