Narrowed up my assault handlebars a little and was wondering if anyone knows of a adhesive that doesn't loosen up with the heat of the warmer.
Thanks
Thanks
Any heat resistant glue, fo resticking a hand warmer
- Thread starter Polaris Racer 169
- Start date
K
Kestrel2126
Well-known member
RSI makes some real good grip glue specifically for this. Check their site
C
chunkysoup
Well-known member
so r u trying to restick the handwarmer or the grip itself. if its the handwarmer i would just stick it on and wrap a little electrical tape around it. if its the grip i have always had good luck with hairspray and others have told me to use spray paint.
I used to use spray paint but recently found a way better way. The liquid tape that you paint on electrical and tool ends. It's amazing! We put them on the ODI grips and BAM super solid. Those grips are super soft and want to twist.
add some adhesive (I used the spray glue) to the back of the warmers and then electical tape each end...then paint on the goo plus some in the grips. IT"S ALMOST INSTANT SO BE FAST! Be prepared with a good cover up and be careful because this stuff does NOT come off of anything. (hands, clothes, sled, floor, ect)
add some adhesive (I used the spray glue) to the back of the warmers and then electical tape each end...then paint on the goo plus some in the grips. IT"S ALMOST INSTANT SO BE FAST! Be prepared with a good cover up and be careful because this stuff does NOT come off of anything. (hands, clothes, sled, floor, ect)
scott makes grip glue that i have had good luck with, about $2 at a bike shop.
I've had the problems with the handwarmer it self. They want like $25 a piece and i say to hell with that. I just need to restick this. I've tried a bunch of different spray glue but as soon as the warmers get hot, the warmer starts to spin. Loose grips just drives me insane. Got some of the grip glue from a bike shop but haven't tried it yet. I'll try these others too
thanks
thanks
