*ANNOUNCEMENT* OFT Racing's new Moto-r Kill w/ Jacobsen ROV!!!!

[christopher]

Does the tether cord have to be pulled for this to work or what?

YES!
The Oil Shutoff System is ONLY TRIGGERED when the tether has been pulled!

 

[Extreme-One]

This system is top notch... install was super easy and all connections were factory. Have one on my wife's Turbo and mine and they work great. Another great product by OFT.

 

[ruffryder]

Do you guys have this kit setup for people with K&N air filters?

 

[MotoPsycho]

Do you guys have this kit setup for people with K&N air filters?

I assume you mean an N/A sled with K&N's instead of the OE airbox? And Nytro model?

 

[ruffryder]

I assume you mean an N/A sled with K&N's instead of the OE airbox? And Nytro model?

yes and yes

Do you need a tester?? cough cough...

 

[Bubbles]

What happens if the rov fails does it fail open or closed?

Could it lock the motor due to no oil getting in the engine?

 

[MotoPsycho]

The valve NEVER stops oil supply to the engine. It instead shuts the oil tank VENT in the case of roll-over or rider ejection. (tether clip dis-engaged from switch) The OEM vent is plumbed to the airbox, and when the sled is not upright the oil runs through the vent hose, and into the airbox. The airbox then drains the oil out into the belly pan. This valve will block the oil from running out of the tank when engaged.

The valve is a normally open valve. If it fails, or has no power to it, it is open and will allow the vapor pressure of the tank to escape normally.

 

[MotoPsycho]

yes and yes

Do you need a tester?? cough cough...

Sorry Ruff,

The kit will work well with that setup. It can be installed in the same position as it would be on an OEM sled.

PS... already tested. sorry.

 

[andre162]

I had one put on my Nytro. Had it out in the mountains last wkd. had the sled on its side once, it was still running since I didn't fall far enough away to pull the tether cord out. It still puked oil out everywhere...... I am not impressed

Does the tether cord have to be pulled for this to work or what?

WOW!!! did you read the directions at all. Used mine twice yesterday and work great. nice product very clean install and i love the new tether setup.

 

[MotoPsycho]

...just got back from CO and the ROV got a good workout! man those things are sweet! i think my nytro spent just as much time upside down as it did upright and never spilled a drop!

Another happy customer...