i notice some people got a bracket and air filter put directly on the small airbox is this just homemade or can u actually by the aftermarket part for it
aftermarket air box
- Thread starter polrmk900
- Start date
That on is made by Timbersled. SLP n Fire-N-Ice are others
anyone ever run it with the two separate tubes with two filter if so how you find it any problems
J
JesseJames
Active member
I had an air intake on my 05 900 with the two seperate tubes and filters. I believe it was from Fabcraft. It did not flow enough air to open the power valves. I chased that problem for a long time until I figured it out. They had several on the snow with no issues though.
I had an SLP on the sled as well. I seemed to have problems keeping it sealed good enough to keep belt dust out.
The last one I used was a Timbersled. Only problem was I had to mod it to clear the HTG single pipe I was running. Other than that, it worked great.
I had an SLP on the sled as well. I seemed to have problems keeping it sealed good enough to keep belt dust out.
The last one I used was a Timbersled. Only problem was I had to mod it to clear the HTG single pipe I was running. Other than that, it worked great.
