Aaen triples on a MM700?

[UMGlasgow]

I have a 2002 MM700 with Aaen triples on it. I was just curious if anyone has a jetting chart or experience with these pipes... I need the jetting for 6500 - 8000 feet and also for 4500 - 6000 feet. Tried everywhere and can find nothing. Have been calling Aaen directly for the past 3 days and no answer on the tech line or the ordering line(I don't know what's going on with that). Anything helps. Thanks!

 

[bailer]

An answer, kind of.....

I had a '00 MM700 with Aaen triples. I was running V force, a Peak Perf. head and then clutching.

I was also running the Holzman Tempaflow on it. I had the Tempaflow on for a season before I did the pipes/heads/reeds.

I believe that when I did pipes, I only re-calibrated the tempaflow for 2000 feet richer. It was perfectly dialed in, and I have never had a sled run as spot on since.

I guess what I am telling you is, if you are jetted on right now, my experience is to fatten the mains up for a 2000' drop in elevation.

Not really the answer you were looking for, but I hope this helps.

 

[yeoman1]

I have a 01 with aaen pipes on it. I do beleive that I have 133 mains in it. I also have it ported and the head shaved. I ride anywere from 6000-9000ft. I keep it a little fat just for some extra insurance. Hope this helps. thay are an awsome pipe.

 

[spudman720]

Have a mm with slp triple pipes and also run 133 from 7500-10000. Dont know if this helps.

 

[viper159]

slp has a jetting chart on there website if you look at the triple pipes for the viper.

 

[UMGlasgow]

Thanks

Thanks guys. That's awesome, I was thinking in that ballpark somewhere around there anyways. Couldn't find an answer even on TotallYamaha or from Aaen directly lol... Leave it to Snowest to come through. Thanks. One more question guys! What do you guys have in there for Pilots? I have some 57.5's and some 60's and also the stocks... What's your suggestions? Thanks!