900 driven clutch

[f15ejedi]

I finally ran my sled after the engine install and everything worked great. Thing runs like its brand new. I noticed when I put my belt on that the inside of the driven clutch moves about 1/2" or so and the outer one doesn't budge. Is this normal? I didn't notice when I took it apart.

 

[ghostwhite]

If you are refering to a twisting motion then yes. One side of the clutch will rotate as it expands.

Mine kinda shimmys back and forth when I remove my clutch tool

 

[f15ejedi]

Whew! I thought something might be wrong with it and I was convinced I did the perfect install on the engine. I really took my time with everything and checked and re-checked before I started it. It only took 3 pulls to start it so I was really happy about that. You don't have to prime it to get it started when you bleed pressure off the system.

 

[ghostwhite]

Good to hear everythings going good! Patience is key with any decent 900