My setup is 160/320 p-p primary spring with 415 ramps toms 3d arms with stock pins and a 6.5 g weight in #2 hole. Running stock size rollers. I recently removed a 4.5 and a 2.5 weight from the arms as it was to heavy and in the older style arms which were lighter then his new style.
I have a team tied with a 64-60 helix not sure on the spring. I rode yesterday in about 3' of powder. On the trail starting the day I was under reving in clicker 3 so I bumped up to 4 small change still under reving. I put it all the way in 6 and had no rpm increase on the hill. The trail heading out I was over reving bad. My question to the clutching guys is Where is my issue and why were my clickers not making a difference on the hill. I have a set of 10g pins coming and also have a set of 441 ramps. The current setup was recommended from tom, just wondering if I have another issue. My primary was just rebuilt as well.
Another thing I noticed is that I marked my primary for full shift out and im lacking about 3/4" from all the way to the top, what causes this. Thanks guys.
I have a team tied with a 64-60 helix not sure on the spring. I rode yesterday in about 3' of powder. On the trail starting the day I was under reving in clicker 3 so I bumped up to 4 small change still under reving. I put it all the way in 6 and had no rpm increase on the hill. The trail heading out I was over reving bad. My question to the clutching guys is Where is my issue and why were my clickers not making a difference on the hill. I have a set of 10g pins coming and also have a set of 441 ramps. The current setup was recommended from tom, just wondering if I have another issue. My primary was just rebuilt as well.
Another thing I noticed is that I marked my primary for full shift out and im lacking about 3/4" from all the way to the top, what causes this. Thanks guys.
