700 IQ RMK questions/help

[XTremist13]

i have a 2006 IQ RMK 700 (which is the 755 cc with the 80 mm stroke) that i rebuilt the motor on last year from the ground up, crank, cases, top end, everything.... the sled is all stock except for an slp intake and an mbrp can. just wondering about how you set the oil "consumpition" on it, is there an easy way to do this or do i have to tear the whole machine apart again ?! also would like to know what is suggested for track tension with stock drivers (151). if there are any tidbits in regard to this sled that anyone has and would like to share thatd be good, how do people like em that have em ??? and lastly ive heard that if you start souping them up they have issues (nos, etc), because it is the 900 bottom end, was debating a boss nos kit but i dunno...... anyway anybody that has some info that theyd share would sure be appreciated...

 

[kbisiar1]

I have a 2006 700 RMK with 2400 miles on it. One tps sensor replaced, and exaust sensor replaced. This sled has been good to me. Only mod is slp air intake and can(dont remember what kind).

 

[XTremist13]

what does the stock egt usually read for #s ? tbs sensor ?

 

[XTremist13]

plug gap ?

 

[kbisiar1]

Champion 954 is the stock plug. I have no idea about the specs for the tps, but i know it has been discussed in past threads...you will have to run a search of old posts

 

[Jones197666]

http://www.snowmobileforum.com/polaris-snowmobiles/64074-2006-700-rmk-spark-plug.html

There's spark plug answers for this one.