R
ReaperMotorsports
Well-known member
Heres some pics of the 600 Race Sled Plastics going on my 1100, some slight work involved in doing it
Last edited:
600 Sno Pro "Race" Body on 1100T
- Thread starter ReaperMotorsports
- Start date
very nice. only thing I have a question is the intercooler angle..... could that cause more problems with higher boost temps??
ok I lied another question.... when the hell you gonna come and put these on my turbo? lol
ok I lied another question.... when the hell you gonna come and put these on my turbo? lol
R
ReaperMotorsports
Well-known member
Intercooler is at the same angle as its always been, so thats not a problem. Once I get it figure out you can look at what I did and try to do the same
R
ReaperMotorsports
Well-known member
Fabricating intercooler scoop
R
ReaperMotorsports
Well-known member
One of these nights I will weight the panels out and see what I have. Feels like every piece I put on is lighter than what its replacing.
T
Turbo11T
Well-known member
I would bet you have cut 10 or more lbs than your original setup with the headlight delete.
A
arctic2009
Well-known member
Very nice reaper! Might as well fab up your own vents for the nose and not bother with the frogskinz that come on them.. They fall off anyway
R
ReaperMotorsports
Well-known member
I probably will do something like that just not too much room to attach them, I will make something once I get that far
That is a real bad boy look Reaper!! That sled just look sick!! You keep impressing with the skills and mods you do. I really like the look of the hood scoop and the sno pro plastic on there 
R
ReaperMotorsports
Well-known member
Thanks guys I had the toughest time last night trying to figure what to do to open up the air box the best to access the intercooler. Lots of fab work left but im liking it so far the new panels will be so much better no more sealing issues and taking the hood off is alot better
so that hood scoop.......... will it work with the stock plastics??
R
ReaperMotorsports
Well-known member
No its not even close but talk to Jim at evo he has a carbon fiber one coming out soon to replace the stock vent it looks pretty sweet!
ya I seen that at haydays.
R
ReaperMotorsports
Well-known member
Heres some updated pictures of the sled, I think I have a majority of the fab work done now. Needs some paint and powdercoat to make it purdy again. Built a new exhaust for it that comes out the side alittle higher and incorporated a screamer pipe onto it. Intercooler is all mounted in the airbox now and new vents for the front. Thinking about placing a fan under my gauge to push hot air out too. Anything else I should try?
Looks really good Reaper!
I'm digging the cars and drag s-10 in the shop.
I'm digging the cars and drag s-10 in the shop.
R
ReaperMotorsports
Well-known member
Anyone with some experience modifying things to fit should be able to handle this. Just takes alot of trimming to get the front airbox to fit an intercooler inside of it and around some other parts only the 1100 came with but as you can see its possible to do. I will like it alot better when the panels are black instead of the green. If anyone needs pictures of everything that was cut to fit just let me know. A 600 or 800 would be alot easier
A
arctic2009
Well-known member
you should see if you can get your hands on a set of 2014 black race side panels.. Would save you the hassle of getting them painted!
Similar threads
