4 stroke roll over valve

[wwillf01]

I put a tether which helps when the bike is upside down... But I find even with the short time upside down with the rekluse you loose oil pretty quickly... I know I used a roll over valve on the Nytro I owned ... Any other people have this issue with the crank case breather? Anyone try to remedy it?

 

[dooman92]

Good question. I'm interested in same.

 

[powdermuncher]

I rout the breather tube up high and than down at least a foot never lost than any oil if set up correctly on a bike. did the same on the 4 stroke sleds same Idea but guys rather spend money on roll over valve kits than a couple feet of hose. The tether is key though you are right on there.

 

[wwillf01]

I am going to try that for sure. I am pretty sure I got some frozen water in the tube and blew my water pump seal...

Sent from my Pixel XL using Tapatalk

 

[wwillf01]

What type of bottle did you use?

Sent from my Pixel XL using Tapatalk

 

[Honky Tonk]

Be worried if your breather hose is routed into your airbox and thus feeding the overflow oil to the engine...My breather is just down the front of the engine and back a bit..As long as it doesn't plug up (it's got THE slit..) it should be fine.. Even upside down, the breather isn't pressure fed..