3" track swap

[Mayz07]

Will the 2016 limited powerclaw track fit the m chassis skid?

 

[Thunder101]

I never tried but after putting in a 2.6 I did not think there was much room left and you have to worry about the Tunnel cleaning itself out so you do want some clearance. I don't think it'll fit

 

[ultrasks700]

It will fit...ive heard it tight. There are a handful of M's running the 3"

 

[RACINSTATION]

It seems they are all different. Some will fit and some will not. Even when they fit, I don't feel the clearance is sufficient and I think you are better off with a 2.6 or 2.8 because of the tight clearance on the 3".

 

[Mayz07]

Thank you for your help, I was kinda leaning towards the 2.6 for all the reasons listed.

 

[Glock41]

I put the 2.8 camso on my 2010 before the start of this season initially I was experiencing some trenching but it was is really light snow with no base. The more I ride with this track the more I like it.

I would definitely consider this track as well.

 

[manlye]

I have one on one of my tm1000's it fits but rubs on the cooler at high speeds from the track flexing, if you do it I would highly recommend 7T drivers.


Sent from my iPhone using Tapatalk