2022 boost….what should I know before buying.

[J270wsm]

I found a 2022 patriot boost limited edition with 0km…. What should I know before buying?
I believe the only recall that has been done is the clutch bolt.

 

[damx]

The only thing I think you need, on the matryx is a good rear bumper., there are lots of stuff that can be added but not needed.

 

[ndfb35]

I would say a new throttle block is mandatory unless you want to risk some cruise control situations.

 

[J270wsm]

Rear bumper is on the list. Unless it’s a completely new design then I think I’ll be ok..I’ve never had any issues with the throttle on my other sleds.

 

[Sheetmetalfab]

Rear bumper is on the list. Unless it’s a completely new design then I think I’ll be ok..I’ve never had any issues with the throttle on my other sleds.

Fyi I never had issues with 800’s whether running hand/ thumb warmers or not but the 850 and the 850 matryx (new throttle flipper that melts snow on the inside then it freezes and causes cruise control) they are very susceptible to throttle lever icing to the throttle block.

 

[J270wsm]

Good to know about the flapper. I generally only run my and warmers while on the trail.

 

[Sheetmetalfab]

Good to know about the flapper. I generally only run my and warmers while on the trail.

Yeah that’s when i got most of the sticking.

On the trail.

It only takes like 2 drops of water freezing in the lower side of the lever against the throttle block.

 

[TRS]

A throttle block would be my first investment. I run a TKI, but there are others out there.

 

[440revNL]

Quality rear bumper is a must for all Matryx RMKs. Aftermarket throttle block if you stick with the thumb throttle.

I run BackwoodsBMP and a Munster finger throttle. But if you're a thumb throttle user, check out Kyber.one!

 

[diamonddave]

Great question. I think what we really need here is one of our resident forum experts to chime in here.