Wondering how people like 1inch offset spindles on there assaults ? Does it side hill better ? Did you make any other adjustments to your sled? Thinking of getting a set wound like some feedback first though ...Thanks !,which brand did you use ?
I went with ZRP they were the first to produce a set so I hade no choices to look at or decision to make! they are a quality peace every thing just set into place take off the old set and put on the new ones and even the toe in toe out was spot on when I was dun. I through them on a scale and cant remember if they were a quarter pound lighter for the set or for each one but one or the other {I went with the natural no powder coating don't think that would make much of a difference if any rely just wanted the polished aluminum look} the sled lays on its side easer and holds better and I have not hade a problem with panning out or hooking/dragging the spindle. it has ben an enjoyable mod over all! sometimes I want it skinnier and some times I want it wider so I think I have found the middle ground for me. as for the other set that is being offered I wouldn't rule them out you should check them out I hear they have a 1 year warranty and haven't read a bad review on them yet "couple bucks cheaper to .. I think" either way if you want your sled a touch skinner its a cheap and easy way to go! good luck greatone
their is no re-valve needed but I suggest playing with your clickers on the shocks... that's what their their for! so many people get the upgraded shocks and never touch them its crazy you should always set them for the days snow depth and consistency it takes 20 seconds and after a bit you know how many clicks to go up or down for what you are riding in. my 2c any way.
