2015 Timbersled lt upgrade track

[wwillf01]

So after riding with st 2016 rides that can hang with my lt I am thinking of upgrading to the new track... Now I run a tunnel cooler on the lt... Does anyone know what the clearance is to the new track... Does it stay the same because of an adapter... It is tight as is?

Sent from my fax machine

 

[machinehead]

I have been told that there are clearance issues running the 2.5 " track on the 2015 kit. It seems to work on the prior kits though. I thought I saw drop kit brackets on this site that might work?

 

[wwillf01]

I have been told that there are clearance issues running the 2.5 " track on the 2015 kit. It seems to work on the prior kits though. I thought I saw drop kit brackets on this site that might work?

I thought I saw that Timbersled had a bracket... Has anyone done this without issue?

 

[machinehead]

Try this link !
http://www.snowest.com/forum/showthread.php?t=395796&highlight=drop+brackets

 

[Northwestguy]

I did a 2.5 convex track on my 2015 ST with TS drop brackets. Works fine, been on it 5X this year. The 15's need the drop brackets because they were lower that year. My buddy did the track on his 14' LT and did not have to do the brackets. I have about 3/8" clearance at the front of the tunnel. Going back from there the clearance goes up very quickly even at the next set of lugs. So if your cooler is even slightly back from the minimum clearance point I'd bet you would be fine.